Kevin Richey actually has 40 of these engines.
In theory it is possible to convert them from charge cooled
to oil cooled. I can show you how.
Kevin is interested in selling a few. Kevin is in the Portland
area.
Paul Lamar
I am definitely interested in buying a few more and I would like
to change my mine from charge cooled to oil cooled so please show us how
David Mikesell
The hardest part is adding an oil seal to the rotor to keeping
oil smoking down. It can be a spring loaded short steel cylinder.
All roller bearings are replaced by oil feed plain beatings.
The oil seal goes about where the red line is on this picture of
the rotor
on both sides. An oil squirter is added to the e-shaft and holes
drilled to supply oil to the plain main and rotor bearings. A
bushing is
added to the rotor to accommodate a plain rotor bearing.
Kevin email address is:
Kevin Richey <
gyroKevin@gmail.com <mailto:gyroKevin@gmail.com>>
Paul Lamar
Paul: Feel free to take OMC snowmobile service manual apart if it will
make scanning the engine portion easier for you. I'm not interested in
the rest of the manual anyway, so having the rotary engine portion of it
scanned is a bonus. Thanks for volunteering to do the scanning! Also the
specification page is, I believe, in the first part of the manual, that
would give the engine specs.
Thanks, Kevin
Thanks Kevin. That will make it much easier.
Paul Lamar
Is this modification from charge cooled to oil cooled also possible on a
liquid cooled AIXRO40 ?
Philippe Dejean
There is a company associated with AIXRO that is already making
a plain bearing version. Contact:
Poul Henrik Woelfle AIXRO
<ph.woelfle@woelfle-engineering.com>
and ask him about it. Also ask about ceramic apex seals.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you
want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.