Subject: Visit with the OMC snowmobile rotary engine King.
From: paul lamar
Date: 5/26/2016, 6:25 PM
To: A10-Me-Earthlink


Kevin Richey actually has 40 of these engines.


In theory it is possible to convert them from charge cooled to oil
cooled. I can show you how.

Kevin is interested in selling a few. Kevin is in the Portland
area.

Paul Lamar

I am definitely interested in buying a few more and I would like to
change my mine from charge cooled to oil cooled so please show us
how

David Mikesell

The hardest part is adding an oil seal to the rotor to keeping oil
smoking down. It can be a spring loaded short steel cylinder.

All roller bearings are replaced by oil feed plain beatings.

The oil seal goes about where the red line is on this picture of
the rotor on both sides. An oil squirter is added to the e-shaft
and holes drilled to supply oil to the plain main and rotor
bearings. A bushing is added to the rotor to accommodate a plain
rotor bearing.

Kevin email address is:

Kevin Richey  <gyroKevin@gmail.com <mailto:gyroKevin@gmail.com

Paul Lamar


Paul: Feel free to take OMC snowmobile service manual apart if it
will make scanning the engine portion easier for you. I'm not
interested in the rest of the manual anyway, so having the rotary
engine portion of it scanned is a bonus. Thanks for volunteering to
do the scanning! Also the specification page is, I believe, in the
first part of the manual, that would give the engine specs.

Thanks, Kevin

Thanks Kevin. That will make it much easier.

Paul Lamar



Is this modification from charge cooled to oil cooled also possible
on a liquid cooled AIXRO40 ?

Philippe Dejean

There is a company associated with AIXRO that is already making a
plain bearing version. Contact:

Poul Henrik Woelfle AIXRO <ph.woelfle@woelfle-engineering.com

and ask him about it. Also ask about ceramic apex seals.

Paul Lamar


HiPaul

Is Rotron the AIXRO associate you are referring to? They make
beautiful gear as can be seen by their web-site,
http://www.rotronuav.com, their twin is especially nice, but their
pricing is a problem.

Regards Steve burgess AU


As I understand it Rotron buys the engines from AIXRO.
AIXRO are the engine designers. As far as I know Rotrton are
still charge cooled.

It was not the company I had in mind.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want
off the list PLEASE let me know and I will remove  you.  ACRE NL
web site. http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas Copyright 1998-2016 All world wide
rights reserved.