Paul, you indicated in a recent e-mail that you had slide throttle kits available
 for $50.00.  I would like to buy a kit.

Gary Luchini :     W6722 Oakwood Road,  Waupun, Wisconsin 53963.
Also can I buy four of the oil injector hole adapters.
Let me know where to send money,  thanks,  Gary

Paul Lamar
830 East Santa Maria St
Suite 303
Santa Paula Ca
93060

You will need to buy some thin teflon sheet from Mcmaster Carr
etched on one side for gluing. Gluing is not essential.
The small bolts can hold it in place.

Oil injector hole adapters are $20 each. I only have two left.

I have some injector block holders for Yellow RX8 injectors for $15 each.
You will need two.

I also have some used Yellow RX8 injectors for $30 each.
You will need 4. No guarantee but they were working.

When you get ready to run and if you buy a $60 Maximite I'll do the
first software free and we will publish it. When you fly it I
will help you tune it. You will need a small PC key board and
small VGA monitor for the instrument panel as the EFIS
will be included in the software. It is self documenting so
you will learn how to program just by reading the source
code. It is in English and not hieroglyphic C :-) Do this ,do that,
wait X number of seconds.

We now take credit cards. If you want to go that route
send me your telephone number by private email.

I'll let you know what the shipping is going to cost pending the weight
and how you want it shipped. Parcel Post is likely to be the cheapest.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.