I found an automatic transmission shop in Santa Paula. in an out of
the way location with a large facility.
The owner is a rotor head but he does not know how to get an early
top of the line RX8 started. Apparently the previous owner did not
get the computer re-flashed by the local Mazda dealer.
This is so typical all over the country. Cars and engines can be had
for a song because the mechanic does not know how to diagnose
problems.
A perfectly good 2nd gen RX7 Turbo II convertible was given to me. a
few years ago. Not just the engine the whole car.
The owner tried for a year or two to get it fixed with different
mechanics in an out lying town. I took the intake system off and
found a crack in the rubber intake system elbow buried down among
the anti smog junk.
Back to the SZP auto tranny shop. The owner was so happy to find
me. This is a top of the line early RX8 in perfect condition with
only 100K on it.
The other things he has is at least a hundred planets out of all
sorts of different auto transmissions.
I found one that is double reduction out of some transmission we
have not identified so far. This means we now have a source of 4:1
planets and can up the RPM to 10,000 RPM. Anybody for a normally
aspirated 300 HP P-port that would weigh as little as 200 pounds with
gear box..
There is a lot of meat on it that needs to be cut off in a lathe and
a mill.
There are 4 pairs of 2 planets each. The planet pairs talk (mesh) to
each other. There are two different diameters in each pair. That
gives the additionally reduction over 3:1.
Probably not strong enough for a highly pumped up rotary. We don't
know for sure until we try one. It will work for an NA engine.
The good news keeps coming :-)
Paul Lamar
Does it accomplish extra reduction or rotation reversal?
Dale Davies
Both. Probably rotation reversal so we would need to take power out
of the ring gear instead of the planet carrier.
Paul Lamar
Folks
Please proceed with caution.
I believe this came out of 1966 to 1980 Ford which according to this
post link, was problematic and caused hundreds of accidents. This may
be another issue in the transmission and the planetary gear set was
good.... I have no idea but I would dig a bit more into this issue
before using it. Also, I am not sure if indeed the photo in this
article (which appears identical gear set to Paul's photo) is from
the Ford or maybe they just posted this planetary gear photo as an
example
Please see the attached
Automotive Reviews Archives - Profile Reviews
<
http://profilereviews.com/category/automotive-reviews/
Regards,
Simon S
It is the Ford part. I am sure the transmission worked as designed.
Perhaps what happened was in the shifting system.
Until I have some more detailed information on the
failure I would hold judgment.
On the other hand we don't shift. There is no way a change of
prop direction can occur after the planet is installed in our gear box.
Yes the planet it self can fail. In that case the prop would simply fail
to turn.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net <
http://www.rotaryeng.net/You Tube
http://tinyurl.com/beqqxas Copyright 1998-2016 All world wide rights
reserved.