Subject: One cylinder EFI engine on the dyno
From: paul lamar
Date: 8/10/2016, 5:07 PM
To: A10-Me-Earthlink

I was going to use this to charge the battery in the motor
home in case it ran down to the point where I could not
get it started. I also used it when I was developing the ignition
system.

I had an idea that it would be ideal for checking a
Maximite based EFI. I'll take the carb off and replace
it with one fuel injector and a manifold pressure sensor.

The Kubutu magnet field alternator load depends on the out put so
this is an electric dyno. Just measure the out put current
and the voltage and you have the HP it is putting
out.

1 HP is 746 watts. Watts is voltage times current.

Head lights would be a good load.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.