Subject: TTC first take off. 650HP Mazda RX7 engine 700 pounds empty weight
From: paul lamar
Date: 8/19/2016, 5:59 PM
To: A10-Me-Earthlink



It was off the ground in roughly 2 seconds. Way faster than anyone of us expected. Less than 100 feet I estimated. The total was about one third of the 2500 feet SZP runway.

This was at 4500 RPM. Not far above the 2000 RPM idle.
Of course the gear box is 3:1 so the prop RPM was only 1500 RPM.

 Max static RPM is 6700. Max power is 8000 RPM.
The prop is so big and the slip stream so strong the air plane would probably hover if one could keep it stationary and from rolling over due to prop torque.

I was unprepared being too far down the runway. Sorry. It won't happen again. I will be where Dan first touches the throttle next time.

Dan reported when he reduced the engine RPM to 2000 it was almost like hitting a brick wall. The airplane landed NOW. That big prop at 666 RPM is a very powerful aerodynamic brake. Dan said it felt like a helicopter.

The thing that gave me the most satisfaction was Dan was comfortable enough to consider making a complete trip around the SZP landing pattern.
We talked him out of it :-) Cal City out in the desert is next.

I am slowly making a rotor head out of him :-) It has been an up hill battle :-) He keeps saying it is going to blow up and I keep saying rotaries don't blow up!

We are in a whole NEW REALM of aircraft power to weight ratio.

THIS IS A MAJOR AVIATION EVENT!!!!!!!!!!!!

Paul Lamar


Very impressive. It looks like a new world record is within your grasp.

Andrew Campbell



The Rotary Engine free News Letter. Powered by Linux. If you want off the list PLEASE let me know and I will remove  you.  ACRE NL web site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas Copyright 1998-2016 All world wide rights reserved.