Hi Steve,

 Can you send me the POH pdf?

 I have the early one for the fixed gear and it has a good 3 View dwg
 that I can scale.

 I am not sure if the retract is the same airframe.

 Paul Lamar

Hi Paul
I don’t have a POH for the III.
You will be chasing the Glasair III RG as it has significantly more prop clearance.
It sits much higher off the ground than the SuperII.

Steve Izett

Which one do you have?

Prop diameter will be an issue. Since we will be re fitting the nose
gear that will be some what under our control.

We may have to use something that looks like this to absorb
1300 HP.

Not that big of course. That is a 5000 HP engine but more than
3 blades.

What is the width and height of your firewall?

That will tell me if I am in the ball park of engine space under the
cowl.

Paul Lamar


 The Rotary Engine free News Letter. Powered by Linux. If you want
 off the list PLEASE let me know and I will remove  you.  ACRE NL web
 site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2016 All world wide rights reserved.