Subject: Glasair Reno racer with new Allison gear box
From: paul lamar
Date: 8/25/2016, 9:53 AM
To: A10-Me-Earthlink



I will still have to move the firewall back inside the Glasair fuselage
about 5 inches to clear the turbo, I might as well go for ten. It makes
it stronger and it can be tied to the spar.

The new Allison gear box is no longer than the Mazda starter :-)

Other than that it looks like I can get everything under the Glasair cowl
including the cooling system.

Quite remarkable for a 1300 HP aircraft engine. Anybody for a poor man's
P51.

Paul Lamar

With turbo compound you should be able to pick up 300 HP for "free".
That would require a Merlin or large round engine to compete on a
power basis. Weight would kill it. What engine has allowed the
Glass air to run 400MPH? From what I see, the admitted power from a
tweaky  TSIO 550 is 650 to 750. The 26B easily doubles that. What
modifications to stiffen the airframe and to prevent flutter
considering you could be approaching 400MPH with that under the cowl?

  Dale Davies


Paul, I realize you built your turbo compound engine for static testing,
but what would it take to turn it into a semi-flying demo, as a proof
of concept for what Dale is suggesting witha  4-rotor?  After all, you
could dyno it the same way you’re doing the TTC engine, with a prop,
even if it never leaves the ground.

Dave Klingler

Naw. The turbo compound system is being built and tested by
the Formula 1 teams. Each spends a couple of hundred thousands
dollars per year on R&D. Nothing like wars and competition to make rapid
advances in technology.

The first turbo compound car will appear any day. Especially if
the gasoline  prices go up again.

I would rather work on the Reno racer. Certain aviation journalist in
high places are getting very interested.

Imagine if the rotary was invented first and somebody showed
up with a Rube Goldberg piston engine :-)

Paul Lamar

You had a very different goal than the Formula 1 teams or, for that matter, long-haul diesel engine designers who have been doing lots of R&D on turbo compounds for decades.  Your goal was to prove that turbo compounds were a good match for rotary engines.  It seems to me that diesel engine designers and Formula 1 teams aren’t really doing anything to prove Paul Lamar’s long-held assertion that a rotary engine could be fuel-efficient.

Dave Klingler

Rumor has it the new Mazda RX9 or whatever they call it is a turbo compound hybrid.

350 HP and 30 MPG around town.

Sometimes the Japanese engineers  work together and Honda is building a
Formula 1 hybrid turbo compound.

Now if you have a dyno and would like to test my 3 rotor TC it that is another matter.

Where are you located?

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.