Subject: Sea Planes and turbo compound
From: paul lamar
Date: 8/28/2016, 10:14 AM
To: A10-Me-Earthlink


 https://www.youtube.com/watch?v=wVmMd2BnbJ4
 <https://www.youtube.com/watch?v=wVmMd2BnbJ4

 Two of my favorite subjects.

 Notice the long skinny hull of the  R3350 TC powered  Martin Marlin.

 There is a hydrodynamic effect called Hull speed.

 Hull speed is expressed as 1.34 X the square root of LWL, or length
 of waterline. This limits the speed of any hull through the water
 unless... or.... until it gets fast enough to get on the step and
 then it can plain.

 In my case... until the hull comes out of the water and rides on the
 hydrofoils.

 That is why sea planes like long LONG skinny hulls.

 The 1920's long fuselage/hull  Donier Wal was way head of it's time
 and it was highly successful for 20 years.  Many were made and
 sold..

 You cannot have too much power in a sea plane or a STOL wheeled
 aircraft. Get those turbo charged high power Mazda engines in your
 aircraft :-)

 Paul Lamar


Hi Paul

The hull speed you quoted is the limiting speed for displacement boats that are not designed to achieve dynamic lift through hull shape etc as you pointed out. There are however  displacement boats that can exceed hull speed quite easily. These are the catamarans and trimarans in either sail or power mode.

The feature that allows this to happen  is relatively light weight but most important is the waterline length to beam ration. The minimum ratio that lets boats exceed hull speed readily is 8 to 1. A 24 foot waterline would have a  3 foot waterline beam. If you really want to move well a above hull speed you would want something like 12 to 15 feet of length for every foot of beam.

The advantage of the long lean hull shape is it does not pound in the waves, it slices through the waves for a more comfortable ride and less structural load. The underwater shape is best a semi circle if you also want minimum drag. Of course if you have a lot of propulsive power available the optimum shape may not be necessary

Best Regards

Gary Macdonald

Thanks for the information Gary. I guess that is why the R3350 turbo compound powered
Martin Marlin was so long and skinny.

I am also amazed that Kelly Troyer on here actually flew in one :-)

I am mainly concerned with the hull drag until a speed is reached where
the hydro foil lifts the hull out of the water. The air prop is not very efficient in
that speed range. Of course a variable pitch prop could be used but they are
expensive and weigh a lot.


Paul Lamar

 The Rotary Engine free News Letter. Powered by Linux. If you want
 off the list PLEASE let me know and I will remove  you.  ACRE NL web
 site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2016 All world wide rights reserved.