Subject: The correct flywheel for RX8
From: paul lamar
Date: 9/4/2016, 10:21 AM
To: A10-Me-Earthlink



Hello Paul,
Can you tell me which flywheel is the correct one to fit to a RX8 engine. I have removed the manual flywheel.
Do I need a balance section from the automatic engine as well as the flywheel. Your help is appreciated .
Regards
Mark Dillar

You need an RX8 automatic transmission flex plate and counter weight.
Don't use Tracy's flex coupling. It over stresses the flex plate
and may cause it to crack. Of course you can buy an after market
expensive chrome molly steel flex plate/flywheel. That is what
Dave Leonard did.

Or use one of our couplings like the one used on the TTC engine.

I have some water jet cut parts left  for the steel version.
Weld it your self.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.