This is from a Ford Patent in 1976.
"The rotary internal combustion engine has a unique dynamic thermal
problem because the epitrochoid surface of the rotor housing experiences
wide variations in temperatures at different locations.
This is due in part to the fact that the three combustion chambers are
fired at the same, location by the same spark plugs resulting in an
extremely high surface temperature in the localized area about the
firing point.
The temperature variation of the epitrochoid surface was exceedingly
wide~ it varied from 208°F to 460°F at 6,000 r.p.m. (wide open throttle).
[Not as high as some piston engine heads. An Continental O200 for example.]
This wide temperature variation leads to improper lubrication between
the apex seal and the epitrochoid , surface."
[Yes that is true with organic oil but not with Mobil 1 synthetic oil or
synthetic 2 cycle oil]
"Yet still another thermodynamic problem, unique to the rotary internal
combustion, is the high amount of unused heat that is rejected by the
engine. Because of the general geometry of a rotary internal combustion
engine, as compared to an average reciprocating engine, the large
surface~to-volume ratio of the combustion chamber results in a
theoretic transmission of considerably greater amounts of heat to the
coolant and/or oil."
End of Ford quote.
Much of the other negative text is not borne out with wide scale
experience of the rotary.
However never the less the cooling system Ford came up with is
highly desirable. It does not solve all the problems but it much
better than the stock cooling scheme.
High vacuum chambers around the combustion chamber will reduce the heat lost
to the cooling system.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.