Just a thought to chew on. I think most folks love the old radial
engines. If you look at the max diameter of the wright engines, it is
about 54 inches.
Lets stretch our imagination and put 3 to 9 rotaries within circle with
the outside being 54 inches. They could be mounted with the base
outward easily within the 54 inch circle.
Each engine can have a gear on the output shaft driving a center gear on
the prop shaft, easily making the 3 to one gear down required for the
prop. Nine rotary engines with 2 rotors each times 650 hp each is 5850
.hp and the same frontal area as an old radial engine. Maybe less
weight too.
Maybe an overrun clutch on the drive gears to shut a few down for cruise.
Really good redundancy as well. Might draw one up on the cad system.
Ken Burdgess
Interesting idea.
Don't stop at 3 to one. Make it 4 or 5 or more to one and use a really
big prop or
helicopter rotor. One way to get gobs of torque out of several rotaries.
That would make a really great helicopter engine.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.