Subject: Llots of power Radial rotary
From: paul lamar
Date: 9/19/2016, 7:32 PM
To: A10-Me-Earthlink


Just a thought to chew on.  I think most folks love the old radial
engines.  If you look at the max diameter of the wright engines, it
is about 54 inches.


Lets stretch our imagination and put 3 to 9 rotaries  within circle
with the outside being 54 inches.  They could be mounted with the
base outward easily within the 54 inch circle.


Each engine can have a gear on the output shaft driving a center
gear on the prop shaft, easily making the 3 to one gear down required
for the prop.   Nine rotary engines with 2 rotors each times 650 hp
each is 5850 .hp and the same frontal area as an old radial engine.
Maybe less weight too.

Maybe an overrun clutch on the drive gears to shut a few down for
cruise.

Really good redundancy as well.  Might draw one up on the cad
system.

Ken Burdgess

Interesting idea.

Don't stop at 3 to one. Make it 4 or 5 or more  to one and use a
really big prop or helicopter rotor. One way to get gobs of torque
out of several rotaries.

That would make a really great helicopter engine.

Paul Lamar


You would need a killer radiator to handle the cooling needs of 6000
HP worth of fire breathing rotary power.  Add an energy recovery
turbine in the mix for each pair of rotary engines and you would have
an unbeatable BSFC to go along with all the other benefits of rotary
power.

Mark LaPierre


Here is what a 4 rotary radial  helicopter engine might look like.
The engines are one rotor engines because lubrication is an issue
with vertically mounted 2 rotor rotaries. Sachs made a lawn mower
with a vertically mounted one rotor.

Turbo charged you would have about  1000 to 1300  HP to work with.
The lack of a traditional helicopter planetary  gear box is a big
advantage.

My guess on weight is about 500 to 650 pounds. Unprecedented power to
weight ratio. Better than a PT6.

---------------------------------------------------------------------------------

 Here is a better 3D of the helicopter engine using aluminium  end
housings and no oil pans. I suspect the dry sump and oil pressure
pumps could be incorporated into the end housing. It is on a some
what tighter 36 inch diameter circle over all.

A corncob version with four 4 rotors would have less frontal area
than  the CW R3350 used in the B29 and the P&W R4360  used in the B36
and the Spruce Goose. HP would be 5,200 or so. The P&W was only 4200
HP.

Make a good boat engine and be easier to cool as well.

Thanks for thinking of this Ken. IMHO we have just seen the very
beginning of the Wankel engine.

Paul Lamar


I fantasized about this config back when I was in love with the Griffon Lionheart.

Chris Cosman


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.