Subject: Llots of power Radial rotary
From: paul lamar
Date: 9/21/2016, 9:28 AM
To: A10-Me-Earthlink


    Just a thought to chew on.  I think most folks love the old radial
    engines.  If you look at the max diameter of the wright engines, it
    is about 54 inches.


    Lets stretch our imagination and put 3 to 9 rotaries  within circle
    with the outside being 54 inches.  They could be mounted with the
    base outward easily within the 54 inch circle.


    Each engine can have a gear on the output shaft driving a center
    gear on the prop shaft, easily making the 3 to one gear down required
    for the prop.   Nine rotary engines with 2 rotors each times 650 hp
    each is 5850 .hp and the same frontal area as an old radial engine.
    Maybe less weight too.

    Maybe an overrun clutch on the drive gears to shut a few down for
    cruise.

    Really good redundancy as well.  Might draw one up on the cad
    system.

    Ken Burdgess

    Interesting idea.

    Don't stop at 3 to one. Make it 4 or 5 or more  to one and use a
    really big prop or helicopter rotor. One way to get gobs of torque
    out of several rotaries.

    That would make a really great helicopter engine.

    Paul Lamar


    You would need a killer radiator to handle the cooling needs of 6000
    HP worth of fire breathing rotary power.  Add an energy recovery
    turbine in the mix for each pair of rotary engines and you would have
    an unbeatable BSFC to go along with all the other benefits of rotary
    power.

    Mark LaPierre


    Here is what a 4 rotary radial  helicopter engine might look like.
    The engines are one rotor engines because lubrication is an issue
    with vertically mounted 2 rotor rotaries. Sachs made a lawn mower
    with a vertically mounted one rotor.

    Turbo charged you would have about  1000 to 1300  HP to work with.
    The lack of a traditional helicopter planetary  gear box is a big
    advantage.

    My guess on weight is about 500 to 650 pounds. Unprecedented power to
    weight ratio. Better than a PT6.

---------------------------------------------------------------------------------

     Here is a better 3D of the helicopter engine using aluminum end
    housings and no oil pans. I suspect the dry sump and oil pressure
    pumps could be incorporated into the end housing. It is on a some
    what tighter 36 inch diameter circle over all.

    A corncob version with four 4 rotors would have less frontal area
    than  the CW R3350 used in the B29 and the P&W R4360  used in the B36
    and the Spruce Goose. HP would be 5,200 or so. The P&W was only 4200
    HP.

    Make a good boat engine and be easier to cool as well.

    Thanks for thinking of this Ken. IMHO we have just seen the very
    beginning of the Wankel engine.

    Paul Lamar


   I fantasized about this config back when I was in love with the Griffon Lionheart.

   Chris Cosman


Well this is s great idea, mechanically, but who in their right mind would be the one to start it up, instant hearing loss !

steve Carlisle

Imagine a DH Beaver with one of these? About the same weight and size as
the Beaver engine. The noise would be worth it. Maybe a DH Otter would
be better suited. How about a Twin Beech? Or a DC3 on Floats?
Just mildly turbo charged. Don't throw those old DC3's away just yet.


Paul Lamar

   The Rotary Engine free News Letter. Powered by Linux. If you want off
   the list PLEASE let me know and I will remove  you.  ACRE NL web
   site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2016 All world wide rights reserved.