Subject: KITPLANES The Independent Voice for Homebuilt Aviation - Engine Theory - KITPLANES Article
From: paul lamar
Date: 9/25/2016, 8:09 PM
To: A10-Me-Earthlink
CC: Paul Dye <editorial@kitplanes.com>


The conclusion is that automobile conversions are doomed to fail
because no one (other than deep pocketed Rotax) can design and test a
PSRU that survives vibratory forces.

http://www.kitplanes.com/issues/33_10/builder_spotlight/Engine-Theory-geared-drive_21647-1.html

Barry Gloger

That is strange. All those people (hundreds) that have been flying rotaries  for thousands of accumulated hours on the Ross and Tracy Crook gear boxes based on the Ford Planetary
since 1973 must have dreamed they were flying. Dave Leonard has over 650 hours
with a turbo rotary and Tracy's GB  I estimate has well over 200 HP.

The vast majority of radial engines since the 1920's or so have had gear boxes and
that includes the P&W R4360 corn cob engine.  Not rotary engines.... radial engines.
Most are planetaries. A piston engine is much harder on gear boxes than a rotary.
It is not that hard to design a gear box.

The current editor of Kit Planes is uneducated on aircraft  gear boxes among
many other things. I don't buy  Kit Planes  anymore. It is not worth it. No real
info in terms of numbers. Just a lot of bull shit.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.