Subject: Rotary options for LSA Austro Certified Ae50 rotary
From: paul lamar
Date: 9/26/2016, 10:58 AM
To: A10-Me-Earthlink



The AE50R is the single rotor of the AE 110R which used to be the norton/midwest engine, a company  that was bought by diamond.

The 110 was a 2 rotor design and they "certified the 50 (single rotor) before they "closed" the Midwest company and started producing  the 50 in their austro plant.

No complaints about the engine mine was a 110 R, except it was by no means a no loss lubrication system-- they may have changed it since then. The engine uses specified (spell expensive) lubricant or only one mobil oil designed for natural gas powered engines. (anybody want a 55 gal drum (practically unused)-- just get it out of my hanger.

the oil was metered into the bearings (gravity fed to the metering pump) and then blown by a turbine (belt driven) through the rotors for cooling,  the air/oil spray was then sent through what amounted to  a humidifier filter where about 30% or so was reclaimed by gravity, pumped back into the resevoir and the rest was vented overboard (to accumulate on my right wheel pant.)

When I had my engine problem in the air, which resulted in a forced landing and loss of the airplane, I went through great lengths to have Diamond enable me to read the log codes of the electronic fuel injection/ignition. They refused only to say "send it back to us and we will read the codes for you." Not trusting them, I refused to send it back to England and shortly thereafter I received a notice that the company had ceased to exist (probably bankruptcy.)

I hope that they changed the oil situation (look for the turbine hanging off the back of the engine.)

Although I loved the engine in terms of its weight and smoothness, because of the atrocious customer support I received from Diamond (even talking to Christian Dries personally and in effect getting the international hand gesture of peace from him) I would have trouble doing business with his engine company. I have no idea of what the customer service is like with the rest of the Diamond company. It is a series of corporations owned by other corporations owned by other corps.

Other than the dirty problem with the engine mechanically I liked the engine.

It did use hard to get surface electrode spark plugs (I still have a good supply of them)-- any takers?

I got rid of the engine a long time ago.

Rich Goldman


   working on an 80 horsepower rotary to
   "replace" a Rotax 912 80hp. Anyone

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.