Subject: One rotor E -shaft
From: paul lamar
Date: 9/27/2016, 9:10 PM
To: A10-Me-Earthlink



I am thinking of machining a batch of one rotor e-shafts.

If your interested I will put you on the list.

Paul Lamar

Hi Paul,

Can you provide some additional details around the expected
specs of a single rotor engine? Weight, expected hp naturally
aspirated, expected hp turbocharged, likely engine dimensions etc

Thanks!

Matt Humble.


About 150 pounds plus or minus 25 pounds less the gear box.
Of course that is assuming racing beat alloy end housings.

We should be able to get the gear box down to less than
35 pounds with a redesign. Still working on that.

It would be about 130 HP at 7000 RPM with a P-port

It is real easy to add a small turbo because it can be bolted directly
to the rotor housing. Based on what we have learned with the TTC engine
 250 to 275 HP would be available.

One should be able to set an altitude and speed record in
the lower weight classes.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.