I am thinking of machining a batch of one rotor e-shafts.
If your interested I will put you on the list.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want
off the list PLEASE let me know and I will remove you. ACRE NL
web site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas Copyright 1998-2016 All world wide
rights reserved.
Hi Paul
What do you think of the one rotor package that Atkins Rotary are
offering.
Steve Burgess AU.
I don't know. I have not heard anything good or bad about it.
I also don't think it is p-ported, In that case it will be well under
100 HP. Could be as little as 75 HP.
A p-port is essential.
Of course if it does not have aluminum end housing it will
be very very heavy for 75 HP. My guess is close to 200 pounds.
You can always add those features but at rather high cost and time.
The p-port might require a different carb or EFI system.
Paul Lamar
If the group is interested.. (?) David has the dyno print out and price
of individual components as well
http://www.atkinsrotary.com/store/one-rotor-engine.html
bruce buksyk
$9500 ????
Wow that is a lot of money when one can get a brand new 2 rotor for less
than $4000. Most of the time way less than that for a perfectly good
used engine.
There are a bunch on ebay for $1500 to $2000.
Cut the oil pan in 3 parts with a band saw and weld the front and back
together :-)
Now you have a spare rotor housing and rotor.
The one rotors are easy to balance.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.