Subject: One rotor E -shaft
From: paul lamar
Date: 9/28/2016, 10:37 PM
To: A10-Me-Earthlink




  I am thinking of machining a batch of one rotor e-shafts.

  If your interested I will put you on the list.

  Paul Lamar

  The Rotary Engine free News Letter. Powered by Linux. If you want
  off the list PLEASE let me know and I will remove  you.  ACRE NL
  web site. http://www.rotaryeng.net You Tube
  http://tinyurl.com/beqqxas Copyright 1998-2016 All world wide
  rights reserved.


  Hi Paul

  What do you think of the one rotor package that Atkins Rotary are
  offering.

  Steve Burgess AU.

I don't know. I have not heard anything good or bad about it.

I also don't think it is p-ported, In that case it will be well under
100 HP. Could be as little as 75 HP.

A p-port is essential.

Of course if it does not have aluminum end housing it will
be very very heavy for 75 HP.  My guess is close to 200 pounds.

You can always add those features but at rather high cost and time.
The p-port might require a different carb or EFI system.

Paul Lamar


If the group is interested.. (?)    David has the dyno print out and price
of individual components as well

http://www.atkinsrotary.com/store/one-rotor-engine.html

bruce buksyk

$9500 ????

Wow that is a lot of money when one can get a brand new 2 rotor for less
than $4000. Most of the time way less than that for a perfectly good
used engine.

There are a bunch on ebay for $1500 to $2000.

Cut the oil pan in 3 parts with a band saw and weld the front and back
together :-)

Now you have a spare rotor housing and rotor.

The one rotors are easy to balance.

Paul Lamar

How do you balance the single rotor Paul?
I saw you said it was easy, but I have never done it before.

David Mikesell

First it helps if you have a Rhino or Solid works.
Both of those programs can find the center of gravity of a
counter weight if one makes an  accurate 3D drawing.

Then you use this equation.

Both counter weights, front and back, CG's are 180 degrees
out from the rotor. That usually requires a change in
the position of the front key way as I recall.

The rotor itself is dynamically balanced at the factory.

If you machine on it that may change the dynamic balance.
Don't do that. Your are not making an 11,000 RPM race engine :-)

You also need to include a 3D drawing of the e-shaft to
find the effect of the rotor journal.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.