Subject: One rotor E -shaft
From: paul lamar
Date: 9/28/2016, 5:17 AM
To: A10-Me-Earthlink


I am thinking of machining a batch of one rotor e-shafts.

If your interested I will put you on the list.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want
off the list PLEASE let me know and I will remove  you.  ACRE NL
web site. http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas Copyright 1998-2016 All world wide
rights reserved.


Hi Paul

What do you think of the one rotor package that Atkins Rotary are
offering.

Steve Burgess AU.

I don't know. I have not heard anything good or bad about it.

I also don't think it is p-ported, In that case it will be well under
100 HP. Could be as little as 75 HP.

A p-port is essential.

Of course if it does not have aluminum end housing it will
be very very heavy for 75 HP.  My guess is close to 200 pounds.

You can always add those features but at rather high cost and time.
The p-port might require a different carb or EFI system.

Paul Lamar


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.