Subject: One rotor E -shaft
From: paul lamar
Date: 9/29/2016, 7:51 AM
To: A10-Me-Earthlink



 I am thinking of machining a batch of one rotor e-shafts.

 If your interested I will put you on the list.

 Paul Lamar


 Hi Paul

 What do you think of the one rotor package that Atkins Rotary are
 offering.

 Steve Burgess AU.

 I don't know. I have not heard anything good or bad about it.

 I also don't think it is p-ported, In that case it will be well under
 100 HP. Could be as little as 75 HP.

 A p-port is essential.

 Of course if it does not have aluminum end housing it will be very
 very heavy for 75 HP.  My guess is close to 200 pounds.

 You can always add those features but at rather high cost and time.
 The p-port might require a different carb or EFI system.

 Paul Lamar


 If the group is interested.. (?)     David has the dyno print out
 and price of individual components as well

 http://www.atkinsrotary.com/store/one-rotor-engine.html
 <http://www.atkinsrotary.com/store/one-rotor-engine.html

 bruce buksyk

 $9500 ????

 Wow that is a lot of money when one can get a brand new 2 rotor for
 less than $4000. Most of the time way less than that for a perfectly
 good used engine.

 There are a bunch on ebay for $1500 to $2000.

 Cut the oil pan in 3 parts with a band saw and weld the front and
 back together :-)

 Now you have a spare rotor housing and rotor.

 The one rotors are easy to balance.

 ------------------------------------------------------------

 I suspect most of the 900 people on here are afraid of working on a
 rotary.

 The hardest part about it is making some boxes to hold all the
 seals.

 Taking it apart is easy and can be done in an hour or so. It is a
 simple matter of unscrewing 17 tension bolts.

 The rotors have two sides. The side with the gear and the other side
 I will call the oil side. Each rotor has three apex seals A, B and C.
 These are an arbitrary assignment that is up to you to label them
 with black marker pen when you take it apart.

 Another way is use a center punch and put one two or three marks near
 the apex seal to identify them.

 Now buy 4 plastic boxes from Harbor Freight. Cost $3 each, Two boxes
 for each rotor. One box for each side of the rotor.

 Label them as shown before you take the engine apart..

 Now when you put it back together after cleaning the rotor put the
 seals back in the slots they came out of and the engine will run
 exactly the same as it did before or better.

 Put some red RTV 1/8th inch beads on the tension bolts to prevent
 them from resonating. Some times if you run the engine at a constant
 RPM for a long period of time a bolt might resonate and fail in the
 root of the threads were it screws into the front housing.

 Over hauling the engine is simple. If the side housings are marked
 with  wear ridges they can be re lapped by Mazdatrix. Generally they
 are only several thousandth of an inch deep.

 Then it is only a matter of putting in new seals.

 If the rotor housings are severely scratched you will need a new
 rotor housings. The engine will still run with a scratched rotor
 housing but it will be slightly down on power. Less so at high RPM as
 the engine goes into turbo jet mode. It will run at high RPM with out
 any seals at all.

 To keep your engine in good shape an air filter is extremely
 important. The larger the air filter the lower the pressure drop
 across it.

 By all means get your self a junk engine and fool around with it.
 There are 2.5 million out there.


 Paul Lamar

Paul,

 This question may have been asked, over and over, but what engine
 stand is best for Mazda engine repair, and what tools are not normal
 to a home repair person that are necessary to rebuilding a Mazda
 Rotary Engine (metric etc.). Old saying their are never any stupid
 questions, well I feel sort of-by-one.

 George F. Curtis Jr.

Any old engine stand will work.

The worst thing to get off is the nut that holds the flywheel to the E-shaft.

You would need a complete set of metric tools except for the fly wheel
nut. That is US.

Paul Lamar

 The Rotary Engine free News Letter. Powered by Linux. If you want off
 the list PLEASE let me know and I will remove  you.  ACRE NL web
 site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2016 All world wide rights reserved.