Subject: apex seals and side seals
From: paul lamar
Date: 9/30/2016, 4:41 PM
To: A10-Me-Earthlink


Hi Paul, what is the best way to get the seals on the rotor, Apex seals, side seals  out without damaging them. The ones in this old sachs rotor are stuck and I don't want to tear apart to get them out.

David Mikesell


Soak it in solvent for 24 hours. Gasoline or MEK or acetone or even kerosene.
For some strange reason auto transmission fluid sometimes works.

BTW the Sach is a good engine to do R&D on apex seals.
Try glass filled teflon. Back in the days Mazda was doing
research on the subject that was not availably.

The oil squirter should keep the rotor temperature well below
500 F.

Perfect for the side seals as they run nowhere near the temperature
of the apex seals.

Paul Lamar


ATF is very high in detergent.
Dale Davies



The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.