Subject: apex seals and side seals
From: paul lamar
Date: 9/30/2016, 8:32 PM
To: A10-Me-Earthlink


Hi Paul, what is the best way to get the seals on the rotor, Apex
seals, side seals  out without damaging them. The ones in this old
sachs rotor are stuck and I don't want to tear apart to get them
out.

David Mikesell



Soak it in solvent for 24 hours. Gasoline or MEK or acetone or even
kerosene. For some strange reason auto transmission fluid sometimes
works.

BTW the Sach is a good engine to do R&D on apex seals. Try glass
filled teflon. Back in the days Mazda was doing research on the
subject that was not availably.

The oil squirter should keep the rotor temperature well below 500 F.

Perfect for the side seals as they run nowhere near the temperature
of the apex seals.

Paul Lamar


Well I plan on using the addition of the oil squirter so I can bring
the temps up to get more hp out of it.

You think the glass filled teflon will work for apex and side seals?
I would think it might get wedged or stuck in the slots. I would
guess even though it is glass filled still a bit soft though.

If it would work that would be nice to have a all aluminum housing
that will last with nice affordable seals that will last too.

David Mikesell

This carbon filled Teflon is looking great. I suspect the aluminum
side housings can be simply anodized and that is it. Much cheaper
than any type of flamed sprayed coatings.

Paul Lamar


Hi Paul;

You might look into a PEO/MAO (Plasma Electrolytic Oxidation/Micro Arc
Oxidation) which a variant of AL anodizing with good adhesion.
There are lots of processes out there with a variety of coatings and
embedded lubricants as well.  Although most friction numbers were not
quite as good as steel.
Some use less toxic chemicals than normal anodizing as well.

Cheers
Cary Beazley

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.