Subject: Some questions as I get started on this project
From: paul lamar
Date: 10/2/2016, 1:41 AM
To: A10-Me-Earthlink
CC: Mario Haeberer2 Wankel-AG <mail@wankel-ag.de>



Paul,

1 - Is there a book or books that I can acquire that treats the
mathematical development of the shapes of the housing and rotor
specifically for Wankels ? - I'm thinking of programming my CNC
milling equipment and rather than measure an existing engine would
like to approach it from a mathematical point of view rather than
physical measurements -

2 - In particular, are there any specific fundamental equations
available for the SACHS lawnmower, OMC snowmobile, and Mazda engines
- I would like to be able to predict mathematically generated CNC
paths and compare them to measurements of actual parts if possible

3 - The aluminum of the OMC housing and other parts appears to be
fairly soft, possibly the standard 356 casting alloy - I plan to use
6061-T6 as David Mikesell has mentioned  - The OMC housing appears to
have some sort of coating on the running surface that is much harder
- Mentioned was Niksal (correct spelling ?) - Would like to know a
source or sources for getting that done -

4 - Will probably machine and grind new eccentric shafts - Glad now
that I saved all of my precision machine tools when I closed my small
tool & die shop - Anxious to again be making metal shavings -

4 - Mention was made of new seals for the Mazda engines - Any sources
for new seals for the OMC snowmobile engines ? - Too bad I didn't
pursue this when OMC was located here in Galesburg, Illinois - I did
some contract work for them and knew the CEO personally but he has
passed away now and the factory where the castings were made is long
gone - I should try to locate some of the engineers and manufacturing
people who worked on the project and try to pick their brains -

5 - Does anyone on this list have information on expected life of the
OMC engines if they are properly cared for and lubricated ? - The
ones I have look like they led fairly rough lives - I have located
three complete running snowmobiles in upper Minnesota.  I will be
going to see them run and perhaps buy them - Expected lifetimes would
be helpful to know how long they might last -

Sorry for the load of questions all at one time -

Roland Friestad

    Have you looked at the web site?

    http://www.rotaryeng.net/books10.html
<http://www.rotaryeng.net/books10.html>

    Book Reviews Rev. 11


   WANKEL TYPE ROTARY ENGINES

The definitive book on the rotary is simply called "ROTARY ENGINE"
    by Kenichi Yamamoto published by Toyo Kogyo Co. Ltd. (Mazda) in
    1969. This is a highly technical book chronicling the development of
    the wankel by Mazda. Kenichi is an engineer and has risen to CEO of
    Mazda.


This book on the rotary is also  called "ROTARY ENGINE"
    by Kenichi Yamamoto published by Sankaido Co. Ltd.
    Second edition published in 1981. This is an updated version of
    the first "ROTARY ENGINE" book. Confusing eh what? This book
    has a much greater emphasis on emissions.

Another technical book on the Wankel rotary engine is; "The Wankel
    RC Engine Design and Performance" by R.F.Ansdale Published by A.S.
    Barnes & Company Lib of Cong 69-18692

The Wankel engine Design Development Application by Jan P. Norbye.
    Chilton Book Company. ISBN 0-8019-5591-2 Published in 1971. A little
    history and results of the Wankel engine development by NSU,
    Mercedes, Mazda and others and some results of work by
    Curtiss-Wright.  Also some history on all rotary engines. Not as
    technical as I would like but not bad.

    These books will be easier to find then the Toyo Kogyo book.

    You can download the Yamamoto books from

    http://www.rotaryeng.net/interesting.html

    and then    http://foxed.ca/index.php?page=rx7manual

    Paul Lamar

Roland,

Years ago I found a book at the public library with in-depth
mathematical formulas, and drawings of the Wankel Engine.  Sorry if I
had kept a reference to the book I have long ago lost it.  Perhaps
searching Library Books under that topic would give you the Author. I
never found a book with the detail of that book in my searching.

George F. Curtis Jr.

Speaking of machining and grinding the trochoid  when I spoke to Mario
Haeberer at Wankel AG last year he had just received his new Haus NC Mill.
Here is a video of part of our conversation on the Subject.

http://www.wankel-rotary.com/seite1_e.html

mail@wankel-ag.de

These are charge cooled engines as well and they will benefit from our rotor cooling oil squirter.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.