Subject: Some questions as I get started on this project
From: paul lamar
Date: 10/2/2016, 5:23 PM
To: A10-Me-Earthlink



        Paul,

        1 - Is there a book or books that I can acquire that treats the
        mathematical development of the shapes of the housing and rotor
        specifically for Wankels ? - I'm thinking of programming my CNC
        milling equipment and rather than measure an existing engine would
        like to approach it from a mathematical point of view rather than
        physical measurements -

        2 - In particular, are there any specific fundamental equations
        available for the SACHS lawnmower, OMC snowmobile, and Mazda engines
        - I would like to be able to predict mathematically generated CNC
        paths and compare them to measurements of actual parts if possible

        3 - The aluminum of the OMC housing and other parts appears to be
        fairly soft, possibly the standard 356 casting alloy - I plan to use
        6061-T6 as David Mikesell has mentioned  - The OMC housing appears to
        have some sort of coating on the running surface that is much harder
        - Mentioned was Niksal (correct spelling ?) - Would like to know a
        source or sources for getting that done -

        4 - Will probably machine and grind new eccentric shafts - Glad now
        that I saved all of my precision machine tools when I closed my small
        tool & die shop - Anxious to again be making metal shavings -

        4 - Mention was made of new seals for the Mazda engines - Any sources
        for new seals for the OMC snowmobile engines ? - Too bad I didn't
        pursue this when OMC was located here in Galesburg, Illinois - I did
        some contract work for them and knew the CEO personally but he has
        passed away now and the factory where the castings were made is long
        gone - I should try to locate some of the engineers and manufacturing
        people who worked on the project and try to pick their brains -

        5 - Does anyone on this list have information on expected life of the
        OMC engines if they are properly cared for and lubricated ? - The
        ones I have look like they led fairly rough lives - I have located
        three complete running snowmobiles in upper Minnesota.  I will be
        going to see them run and perhaps buy them - Expected lifetimes would
        be helpful to know how long they might last -

        Sorry for the load of questions all at one time -

        Roland Friestad

       Have you looked at the web site?

       http://www.rotaryeng.net/books10.html <http://www.rotaryeng.net/books10.html>

       Book Reviews Rev. 11


                     WANKEL TYPE ROTARY ENGINES

        The definitive book on the rotary is simply called "ROTARY ENGINE"
       by Kenichi Yamamoto published by Toyo Kogyo Co. Ltd. (Mazda) in
       1969. This is a highly technical book chronicling the development of
       the wankel by Mazda. Kenichi is an engineer and has risen to  CEO of
       Mazda.


        This book on the rotary is also  called "ROTARY ENGINE"
       by Kenichi Yamamoto published by Sankaido Co. Ltd.
       Second edition published in 1981. This is an updated version of
       the first "ROTARY ENGINE" book. Confusing eh what? This book
       has a much greater emphasis on emissions.

        Another technical book on the Wankel rotary engine is; "The Wankel
       RC Engine Design and Performance" by R.F.Ansdale Published by A.S.
       Barnes & Company Lib of Cong 69-18692

        The Wankel engine Design Development Application by Jan P. Norbye.
       Chilton Book Company. ISBN 0-8019-5591-2 Published in 1971. A little
       history and results of the Wankel engine development by NSU,
       Mercedes, Mazda and others and some results of work by
       Curtiss-Wright.  Also some history on all rotary engines. Not as
       technical as I would like but not bad.

       These books will be easier to find then the Toyo Kogyo book.


       You can download the Yamamoto books from

       http://www.rotaryeng.net/interesting.html <http://www.rotaryeng.net/interesting.html>

       and then    http://foxed.ca/index.php?page=rx7manual <http://foxed.ca/index.php?page=rx7manual>


       Paul Lamar

Roland,

Some Math Fun Rotor Shapes

http://gizmodo.com/the-weird-math-that-can-make-wheels-that-arent-circula-1462800537/1463001911

Wonky Wheels

http://britton.disted.camosun.bc.ca/WonkyWheels.pdf

Mathematics of the Wankel Rotary-Engine Shapes

http://scot.tk/re/Trochoids/Trochoids.htm

George F. Curtis Jr.


       The Rotary Engine free News Letter. Powered by Linux. If you want off
       the list PLEASE let me know and I will remove  you.  ACRE NL web
       site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
       Copyright 1998-2016 All world wide rights reserved.