Thanks to Paul and everyone who replied to my list of questions – That
gives me enough information to keep me busy for a long time – But always
welcome more info -

After I digest some of the information I suppose I’ll have some other
questions –

Took a few of the OMC Wankel parts to the local airport to use the glass
bead blasting machine – Works pretty well on aluminum as well as steel -


 Roland Friestad


Roland and all,
    Have read recently that glass bead blasting media should not be
used on the interior parts of
any engine as it is virtually impossible to remove all when
cleaning........It will get into the oil and
and wear out bearings and other machined surfaces very quickly.........


Kelly Troyer

Kelly,
Thanks for the heads-up - I'll check with the Overhaul guys at the airport
to see if they use it on engines or not -
Roland Friestad

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.