Hey Paul,

I am going to need to make a redrive to incorporate with the new rotary engine.

So the planetary will need to be small, light. I have a couple of pictures you sent of a larger unit for the 13B's.

I need a recommendation for a smaller unit, that is light and easy to locate. Also a recommendation for a hard elastic material to use as the soft coupler to help prevent resonance or shock loads to the components.

Any help with this would be greatly appreciated.

Thanks
David MIkesell

Find an auto tx repair shop that has a collection of used parts.
Pick out a planetary set wherein the ring gear is twice the diameter
of the sun gear and send me the dimensions and jpg's. Make sure the
shop can order new ones if necessary. I will design a new GB
and send you the IGES.

I assume your NC Mill is working. What brand is it?
Do you have Solid Works or Rhino 3D or Bob Cad?

Paul Lamar


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.