Subject: Wrangler Sport 4:1 transfer case
From: paul lamar
Date: 10/21/2016, 7:31 PM
To: A10-Me-Earthlink


 Paul, we are still trying to get a 4:1 transfer case, even a salvage
 one, but no luck! Wrangler Sport 4:1 transfer case. How about
 putting this on your web to see if a member might have one that he
 would part with.

 Thanks, Milo D. Burroughs


 Yes I spent a lot of time on it an I cannot find a source yet.

 We are stuck at 8000 RPM :-)

 Anybody got a Jeep Wrangler 4:1 transfer case?

 Paul Lamar



Is this one usable?  Looks good.
http://www.quadratec.com/jeep_knowledgebase/article-125.htm

Gary Knutson


Yes. That is the one. I tried about 6 months or so to buy just
the planetary, ring and sun gears. No luck I should try again.
If one had a variable pitch prop one could use 10,000 RPM for
take off and climb out and then greatly increase the prop pitch
and cruise at 6000 RPM for max MPG.

In that case with out a turbo you would have about 300 HP p-port.

Of course with a turbo about 700 HP. Half the HP of a RR Merlin
in the real P51. That T51 would then live up to it's name :-)

The engine and gear box would weigh about 250 pounds.

It would make a wonderful STOL or VTOL engine.

Thanks Gary.

Paul Lamar



 The Rotary Engine free News Letter. Powered by Linux. If you want off
 the list PLEASE let me know and I will remove  you.  ACRE NL web
 site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
 Copyright 1998-2016 All world wide rights reserved.