Dear Mr. Lamar:
I have just learned of a new type of transmission: the "Abacus drive".
It is designed "to translate the low torque, high speed rotation of a
typical electric engine into a lower speed, higher torque rotation"
Sure, they say "electric motor", but I can think of another low torque,
high speed rotating motor. Could this Abacus drive form a lighter, more
efficient PSRU, to give the Wankel rotary engine an even greater leg up
on the piston?
Here is the link:
http://www.roadandtrack.com/new-cars/car-technology/videos/a31260/abacus-transmission/?src=nl&mag=rdt&list=nl_rdt_news&date=102416
<http://www.roadandtrack.com/new-cars/car-technology/videos/a31260/abacus-transmission/?src=nl&mag=rdt&list=nl_rdt_news&date=102416>
This Brilliantly Weird Design Is the First New Rotary Transmission Since
the 1960s
<http://www.roadandtrack.com/new-cars/car-technology/videos/a31260/abacus-transmission/?src=nl&mag=rdt&list=nl_rdt_news&date=102416>
www.roadandtrack.com
It's mesmerizing to watch.
Sincerely,
Les Nordman
Rube Goldberg would love it :-) I'll pass!
Planetaries can be as good as 98% efficient.
Paul Lamar
Cyclical drives exist commercially since a long time, some 3 to 4
decades or so. See SM Cyclo Drive by Sumitomo. We have used these in our
industrial plants quite often. Very reliable and durable.
This one is a variation using a 'flexible' external gear working with a
circular internal gear.
The flexible external gear likely cannot be steel? If not steel and
flexible what material would it be that would last and have low friction?
It seems a 'good idea' but is it practical?
Remember, power is torque times rpm, if output rpm is low torque is high
that must be supported by the flexible gear teeth.
Rolph pfeiffer
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.