Subject: air cooling baffling for un symmetrical air cooled Mazda
From: paul lamar
Date: 10/31/2016, 11:50 PM
To: A10-Me-Earthlink



This is just the first guess. I'll try two openings next.
One on the left on the cowl  and one on the bottom
of the cowl.

If the PSRU is integrated into the front cover that will act
as a huge heat sink. A few fins here and there might be
advisable.


------------------------------------------------------

Here it is with a 10 inch spinner. Two cooling baffles. One under the spinner
and one on the upper left from the pilots point of view.
Much better than one opening. These are 4 inch diameter openings.

This is going to make one heck of a very low cost  LSA engine.

I think we should sell it at the same price as a Rotax 912.

Paul Lamar

 The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.