Subject: air cooling baffling for un symmetrical air cooled Mazda
From: paul lamar
Date: 11/1/2016, 1:44 PM
To: A10-Me-Earthlink




This is just the first guess. I'll try two openings next. One on the
left on the cowl  and one on the bottom of the cowl.

If the PSRU is integrated into the front cover that will act as a
huge heat sink. A few fins here and there might be advisable.


------------------------------------------------------

Here it is with a 10 inch spinner. Two cooling baffles. One under the
spinner and one on the upper left from the pilots point of view. Much
better than one opening. These are 4 inch diameter openings.

This is going to make one heck of a very low cost  LSA engine.

I think we should sell it at the same price as a Rotax 912.


Paul Lamar



The heat sink material could be bought in full length, cut to the
length needed,  machined with bolt flanges on the side to allow the
heatsink to be bolted to the end plate edges. No fasteners in the
rotor housing. Just an option.

Steve Carlisle

You need a good clamping force on the heat sinks so studs welded to
the rotor housing are advisable.

With the exhaust and the intake mounted down we could go forward
with the intake and use a side draft Rotec/Eillison  carb under the
front of the engine.


Paul Lamar


Paul, the flats you have on the rotor housing, as well as the side housings give good heat sinkmounting options. What volume of heat sink will be needed on the side housings, and how would
that be interfaced with the PSRU. Are you still considering flat SS plates for end housings under
the aluminum casting?

Steve Carlisle

I think we will bolt some heat sinks to the back cover and then use a
infrared thermometer to measure the temps under full power with
a propeller on.  If too cool under all conditions then we can start
cutting them down. The other way is to use FEA to model the thermals.
I don't have that software and their is a steep learning curve using it.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want
off the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.