Subject: OMC and Sachs apex seals.
From: paul lamar
Date: 11/3/2016, 9:46 AM
To: A10-Me-Earthlink



If you guys are building chrome plated steel rotor housings steel apex seals
will work. Radius the edges and polish them as smooth as you can.

A lot of steel after market apex seals for the Mazda are junk as they
are not smooth enough.

I had a professor at UCLA analyze some apex seals for me a few years ago.

Mazda uses /Acicular cast iron/ which is the best metal for apex seals
but steel will work if highly  polished.

I don't think Iannetti has silicon nitride apex seals for Sachs or OMC.
I could be wrong. Since you are building your own chrome plated steel
rotor housings not such a disaster if the rotor housings  get scratched.

http://www.rotaryeng.net/seals.html <http://www.rotaryeng.net/seals.html>


Paul Lamar

Paul: Francisco Ianetti was interested in doing up a batch of his ceramic apex seals for me for the OMC rotary. I sent him a new OMC apex (two piece) seal and spring for measurements. His quote was $600 for the three seals, but wanted a minimum amount that I cannot recall now what that was.

I decided to not spend the many thousands of $$ to outfit all the engines I have, and asked him to return the apex seal and that I would reimburse him for the postage to do so. I never heard back from him, nor did he return it.

I also did the same with the guy in Canada (Shaw?) that also makes ceramic apex seals. Same situation on all points. Both fellows were quite interested in producing apex seals for me for the OMC, and were quick in replying to my emails and phone calls. After much thought, I wrote both of my decision to not proceed, and both went silent from that point on...

Shaw insisted that current ceramic apex seals for the Mazda 12A & 13B (the Mazda 10A apex seals are smaller in dimensions than OMC's) could not simply be ground/machined down to the OMC size, when I asked that question.

Kevin Richey

We don't have a history with those Canadian seals and I get the imprecision they
are not the requisite silicon carbide.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.