The engine is lost in the cowl :-)
I think I'll put a huge muffler in there :-)
I have some more ideas on the cooling baffles. Do away with at least
one :-)
Paul Lamar
That looks great with all that room. I think it would be ideal for
fitting to my Barber Snark although I would only need about 105 HP
as that would easily allow me to exceed VNE of 140Kn. You mention
making the body out of block of steel but what grade of steel would
be best and what would you estimate machining cost at? If more that
one off to be done would it not be best to rough cast the shape and
then finish of with the NC machine centre allowing some flats for the
heat sinks. If the price to build is low enough you would be able to
compete in the drone market as well as small aircraft. If enough
rotary enthusiasts go together they could form a viable engine
company.
Colin Dale
You don't have to open the throttle all the way.
Here that cooling idea I had. Works well for the top heat exchanger.
We need an experienced corporate CEO.
Paul Lamar
Greetings, Paul
For the past several months I have been searching the internet for all
things pertaining to rotary, in an effort to prepare a start up business
plan, producing rotaries to satisfy a substantial angel funder.
The intended market is, ultralight high power motorcycles, off grid
energy and of course aviation.
We are seeking a highly experienced over qualified aeronautical engineer
and mechanical/machine shop owners to negotiate coming on board to
finalize engine physics and production processes.
Initial single rotor Engine sizes: 5hp, 30hp, 50hp, 100hp. (Much larger
multi rotors to follow)
Proprietary Compound turbo exhaust energy recovery systems capturing
kinetic and heat energy are a paramount requirement.
It has so far been determined that an engine based on a forged hard
chromed chromoly ring overlaid with a carbon fiber honey comb filled
with ceramics. Finished for strength/final shapes automatically wrapped
in sufficient layers of carbon fiber material by high pressure molding
technics will likely to produce a highly efficient,light weight
affordable product.
Respectfully awaiting your questions/responses.
Thank you,
Michael Nash
Staunton, Virginia
You are on the bleeding edge there. You won't save a lot of weight in
the overall product. Make the rotor housing out 4340 or 4130
and let it go at that. It only needs to be 1/4 inch thick roughly.
Add aluminum heat sinks as necessary. That is a much easier R&D
program to fine tune the thermal characteristic.
Is Staunton Miltary Academy still in Business? Fork Union used to play
foot ball
with them. I went to Fork Union.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want
off the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.