Subject: New NASA opportunity for rotary
From: paul lamar
Date: 11/7/2016, 8:02 AM
To: A10-Me-Earthlink




Paul,

Reading the discussion about NASA prompts me to send some stuff with current info. The aeronautics part is about 4% of the total NASA budget, so it's small. Some friends of mine there are working on electric airplanes, that can do things normal airplanes can't. Not intending to talk about that, just bear with me for a moment.

Things are going to get very interesting in the next couple of years. I know of at least two electric VTOL aircraft that have flown with an adult human aboard, and several other teams that have flown models and subsystems. They can't fly for very long, because batteries are still too heavy. What's needed right now is a light, quiet, reliable (note, I didn't say cheap, or efficient) range extender that can address this problem.

NASA likes to develop high risk, high return concepts, because they can.
But they and their contractors *buy* conventional solutions when needs are met.

I talked with Woelfle about this a couple of years ago, and they have the right approach but need funding in advance. They have already developed a 20 kW unit which is great as far as it goes, but it needs to be bigger.

To see where the market is going, go to uber.com/elevate and download the white paper. Disclaimer: I wrote the acoustic section, and parts of the others, as a consultant for them -- they have a long way to go but it's a good start. Their idea is simple -- if you build some of these and make it possible to fly them in cities, Uber will buy some. Whether this is absolutely realistic depends on too many variables to consider, but there will be people competing in this space starting now, and they have problems to solve.

The electrical part is fairly easy. You'd be using a multiphase permanent magnet generator made the same way brushless motors are made
-- in fact they might be essentially the same part. Whatever voltage and frequency is most efficient for a given design would be fine, and the multiphase output would drive their power circuitry.

You'd have to do the analysis looking at the cruise power budgets, but there will be needs for everything from 50 to 500 kW (70-700 hp roughly) initially. A Rotax weighs about 130 pounds with cooling and without gearbox, 92 hp all day at 5500 rpm. It makes sense to use two of them to produce 200 hp (150 kW.) Can you beat this with a rotary? If so, developers in this space will buy them.

David Josephson

I would rather not cater to that market. Too risky. I would rather stick to an established market like LSA. We would still go head to head against the Rotax. We could beat them on first cost and life. Basically the Rotax is scrapped at the end of 1500 hours or what every the TBO is now.

The turbo option would give us up to 250 to 300 HP with little increase in weight.

Yes I know the LSA sport rules specify a max speed but the HP can be used for STOL or even LSA VTOL :-)  There is no rule on how fast you can take off :-) My eye is on OZ as the entire out back is a potential air field. I have flown all over the eastern third.

We have to sell enough of them to pay for the start up cost.

BTW David do you know Simon Saba? He and David Mikesell are in your neck of the woods. I am thinking of driving up in the next few of weeks.

Paul Lamar


Rotax are about to produce a 130 hp 916.
As with all the Rotax engines they should not sustain full power for more than 5 minutes,
The 914 turbo 115hp sells here in NZ for around $30,00. So you can imagine the cost of 130hp.
Andrew Campbell


A Lyc O-235 is $40,000 in the states.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.