Subject: New NASA opportunity for rotary
From: paul lamar
Date: 11/7/2016, 7:59 AM
To: A10-Me-Earthlink



   Paul,

   Reading the discussion about NASA prompts me to send some stuff with
   current info. The aeronautics part is about 4% of the total NASA budget,
   so it's small. Some friends of mine there are working on electric
   airplanes, that can do things normal airplanes can't. Not intending to
   talk about that, just bear with me for a moment.

   Things are going to get very interesting in the next couple of years. I
   know of at least two electric VTOL aircraft that have flown with an
   adult human aboard, and several other teams that have flown models and
   subsystems. They can't fly for very long, because batteries are still
   too heavy. What's needed right now is a light, quiet, reliable (note, I
   didn't say cheap, or efficient) range extender that can address this
   problem.

   NASA likes to develop high risk, high return concepts, because they can.
   But they and their contractors *buy* conventional solutions when needs
   are met.

   I talked with Woelfle about this a couple of years ago, and they have
   the right approach but need funding in advance. They have already
   developed a 20 kW unit which is great as far as it goes, but it needs to
   be bigger.

   To see where the market is going, go to uber.com/elevate <http://uber.com/elevate> and download
   the white paper. Disclaimer: I wrote the acoustic section, and parts of
   the others, as a consultant for them -- they have a long way to go but
   it's a good start. Their idea is simple -- if you build some of these
   and make it possible to fly them in cities, Uber will buy some. Whether
   this is absolutely realistic depends on too many variables to consider,
   but there will be people competing in this space starting now, and they
   have problems to solve.

   The electrical part is fairly easy. You'd be using a multiphase
   permanent magnet generator made the same way brushless motors are made
   -- in fact they might be essentially the same part. Whatever voltage and
   frequency is most efficient for a given design would be fine, and the
   multiphase output would drive their power circuitry.

   You'd have to do the analysis looking at the cruise power budgets, but
   there will be needs for everything from 50 to 500 kW (70-700 hp roughly)
   initially. A Rotax weighs about 130 pounds with cooling and without
   gearbox, 92 hp all day at 5500 rpm. It makes sense to use two of them to
   produce 200 hp (150 kW.) Can you beat this with a rotary? If so,
   developers in this space will buy them.

   David Josephson

   I would rather not cater to that market. Too risky. I would rather stick
   to an established market like LSA. We would still go head to head against
   the Rotax. We could beat them on first cost and life. Basically the Rotax
   is scrapped at the end of 1500 hours or what every the TBO is now.

   The turbo option would give us up to 250 to 300 HP with little increase
   in weight.

   Yes I know the LSA sport rules specify a max speed but the HP can
   be used for STOL or even LSA VTOL :-)  There is no rule on how fast you
   can take off :-) My eye is on OZ as the entire out back is a potential
   air field. I have flown all over the eastern third.

   We have to sell enough of them to pay for the start up cost.

   BTW David do you know Simon Saba? He and David Mikesell are in your neck
   of the woods. I am thinking of driving up in the next few of weeks.

   Paul Lamar


   Should be simple enough to use a pilot tube for speed sensing and use a diaphragm to close another butterfly in the intake. Easy enough to calibrate a spring to control speed. Is LSA speed limit indicated or actual speed?
   Dale Davies

   The Rotary Engine free News Letter. Powered by Linux. If you want off
   the list PLEASE let me know and I will remove  you.  ACRE NL web
   site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
   Copyright 1998-2016 All world wide rights reserved.