Subject: Fwd: Private - kays and london formula
From: paul lamar
Date: 11/23/2016, 11:51 AM
To: A10-Me-Earthlink



Paul, I have your "how to cool a wankel" book and didn't know if this question is for the general newsletter or not since I'm attaching a picture right from it.

The picture of page 37 is of Kays and London diffuser. Is there a formula for U, A, Vm, etc?

I remeber hearing, the opening is 20% or 15% of your surface area. Or I could be getting confused with Kuchemann and Weber.

- Matt Boiteau


We first said in the book  but later experience has shown in the TTC and Neil's Glastar 15% is too big,
It is more like 7.5%. One reason for that  is.....it is  always in the prop blast. Surprisingly, with a 15%
opening in the TTC, it never gets above 120 degrees F :-) I am stupefied by that :-)

That Kay's and London wedge diffuser works extremely well. In the TTC we  also have
very good venetian blind cowl flaps that are fixed open. These cowl flaps
are a 90 degree arc shaped. I am sure that is helping a bunch to draw the air
through  the rad. Neil's are flat but adjustable.

If you want it to work even better... Ian Beadle in OZ used the K & L.... S shaped diffuser and made
the opening even smaller. Here is a shot of his airplane. It is hot in the outback and this works.
I went for a ride. This cools both water and oil.

Paul Lamar


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.