I am working on a new EFI system based partially I what I learned using the TTC Motec
system.

It will be super easy to wire and super fast to wire. Can be wired in minutes and not hours,.
This is a MAJOR breakthrough for after market EFI. Unlike all EFI systems on the
market today.

There will be an EFIS built in with all the engine parameters and manifold pressure.
All data will be recorded like the Motec.
It will be stored on a 32 Gig Micro SD card. This card can be taken out and read by any PC
and most tablets and cell phones using Android. Maybe Apple but I don't have
one to test it on. Not available on the Motec.

The screen on the instrument panel will be of your choice. All one needs is a VGA
interface.

This is a list of the recorded and instrument panel displayed data so far.

Manifold pressure
Oil pressure
Oil temperature
Water temperature.
Manifold air temperature.
RPM
Altitude. Handy for tuning.
Air speed
O2 rotor 1
O2 rotor 2
EGT rotor 1
EGT rotor 2.

It will control stock RX8 ignition coils. This saves money as you will probably have them.
It will control stock RX8 yellow injectors. Dido.
It will use two a stock CAS. Dido for one.

It can handle two CAS as this is a critical part in all EFI systems.
If this goes out the engine stops. No if ands or buts.
So I have implemented two. One to control rotor 1 and one
to control rotor 2. If either one goes out notification is
shown on the cockpit screen and control reverts to the one
good one  but but it will then control both rotors just like the stock
system.

More on this new EFI system later.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.