I came across this picture in a design guide brochure for a 3D
printing service (Xometry). Immediately recognized the trochoid shape
with cooling chambers. I was going to inquire about the cost of the
part and whether dissimiliar metals can be combined in one cohesive
part. Anyone in the rotary group recognize it as their own? Daniel
Tyler Inline image 1
Could they be making the part in wax or low temp plastic then casting
the housing? Wouldn't the housing be stronger if ot were cut from
billet? (Using a water jet cutter to avoid heating the metal ?
Rob Miller
Paul, Rob, I have done a lot of research on the DMLS process. This is
not wax! This is directly FUSED metal. The resulting solid is
generally as good as billet material. This additive process uses the
laser to melt the layers together. many exotic materials are
available. The earliest use I saw of this technology was it make new
shape jet engine compressor blades. This is a very highly stressed
part and the DMLS process was making a nearly finished shape. Very
little post machining. The price varies based on how exact you want
the part and the finish. If you want a very good surface the layers
must be very thin and the laser time will be high. If you can deal
with a fairly rough surface say +-.010-.015 it is considerably
cheaper. That rotor housing would require inside finishing and
coating, but the outside could be left as is. The water passages
might even benefit by having more surface area.
Bill Jepson
Bill there must be some post processing of the blades? As I understand
it most modern turbine blades are heat treated to reduce the crystal
structure of the metal. The goal being to have the net shape of the part
to be one monolithic crystal. This greatly improves the life of the
blade, increases possible operation temps to extremes and makes it much
stronger at temp. I know the turboprop that I fly used to be temp
limited to ~620C on the ITT, it now has a limit of 805C. As I understand
it, this technology is part of that improvement in possible operating temps.
Fwiw
Jarrett Johnson
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.