I came across this picture in a design guide brochure for a 3D
printing service (Xometry). Immediately recognized the trochoid shape
with cooling chambers. I was going to inquire about the cost of the part
and whether dissimiliar metals can be combined in one cohesive part.
Anyone in the rotary group recognize it as their own?
Daniel Tyler
Inline image 1
Could they be making the part in wax or low temp plastic
then casting the housing? Wouldn't the housing be stronger if ot were
cut from billet? (Using a water jet cutter to avoid heating the metal ?
Rob Miller
Paul, Rob,
I have done a lot of research on the DMLS process. This is not
wax! This is directly FUSED metal. The resulting solid is generally as
good as billet material. This additive process uses the laser to melt
the layers together. many exotic materials are available. The earliest
use I saw of this technology was it make new shape jet engine compressor
blades. This is a very highly stressed part and the DMLS process was
making a nearly finished shape. Very little post machining. The price
varies based on how exact you want the part and the finish. If you want
a very good surface the layers must be very thin and the laser time will
be high. If you can deal with a fairly rough surface say +-.010-.015 it
is considerably cheaper. That rotor housing would require inside
finishing and coating, but the outside could be left as is. The water
passages might even benefit by having more surface area.
Bill Jepson
Ok that's cool what I meant by wax was the most wax casting process
where the part is made out of wax or low temp plastic and a mold is made
and the metal poured in melting and displacing the medium and making a
cast metal part but the process you described sounds good
Rob Miller
Rob,
I did some engine design on 2stroke engines a long time ago. All the
parts had to be machined. Still a cool project. Now you can get additive
type direct 3d modeling with plastic, this can make a fast investment
casting. They even have a soluble support material that can be washed
out of complex parts. That is a completely different animal from the
laser sintering. I actually always thought that the name was wrong.
Normally a sintered part is a powder pressed and then fired for
completion. DLMS is more like a 3d construction. The only similarities
are both processes start with a powdered metal. The turbine blades I
mentioned do get heat treated, and at least polished after the DLMS
process. I think they also machine the root where they attach to the
hub. Don't know much more about those parts.
Bill Jepson
The Rotary Engine free News Letter. Powered by Linux. If
you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.