Subject: Laser metal sintering of rotary housing
From: paul lamar
Date: 12/3/2016, 11:32 PM
To: A10-Me-Earthlink



I came across this picture in a design guide brochure for a 3D printing service (Xometry). Immediately recognized the trochoid shape with cooling chambers. I was going to inquire about the cost of the part and whether dissimiliar metals can be combined in one cohesive part. Anyone in the rotary group recognize it as their own?
Daniel Tyler
Inline image 1



Very nice looking part! Did you watch the www.protolabs.com SAE presentations?

They offer a complete prototype or small series part making at reasonable prices; for me, same as with 3D printers, extensively addressed in its metal side in Additive Metal Manufacturing and Powder Metallurgy Magazines, the problem is not making the part, but the very beginning, having a definition and a workable drawing of part.

Thanks, have a good season, best regards, + Salut

    Jose Gros-Aymerich

 Madrid, Spain

Do you work for the SAE Jose :-)

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.