Hi paul,
Do you have any idea if the plasma ignition systems that seem to be
popping up are a step forward or just a gimmick.
1.     ignitionsecrets.com/
Andrew. Campbell


It is all BS with no real information. It is easy potoshop pictures.
There are no patent numbers mentioned either.

Paul Lamar


This guy is basically selling his hi priced booklet full of crackpot
theories. I looked at some of his youtube vids and his blog. I was then
able to decode his unintelligible circuit description. The concept is
valid on paper, however the implementation is surely unreliable. The
20kV diode is going to be subjected to hi current spikes that probably
exceed its 2A rating. I ordered some of these diodes and plan to make
some measurements, which I'm sure he is incapable of. Will report in 4-5
weeks when diodes arrive. Meanwhile don't even consider it for your
lawnmower.

Robert LeClercq


It is easy to make a still picture like that with an old film camera.
You just leave the lens open longer than necessary.


It must also need to spark in a pressure chamber at 1500 psi or higher.
Air is an insulator. Particularly at high pressures.

Paul Lamar

Correction 300 psi.

That is why the spark plug gap on the TTC is .018"

Paul Lamar.

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net <http://www.rotaryeng.net/> You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.