Hello Paul,

please, do not get angry about the following lines.

During some breaks, smoking a cigarette ;-), I've thought about your new
ignition system. And now I have a fear ...

Perhaps the time between the individual sparks at one spark plug is not
sufficient for good scavening of the plug holes - then we wouldn't get
enough fresh mixture for several successful ignitions at the same position
... ?

I do not know, whether my fear is "justifiable" - only tests will show ...

I hope, my thoughts are wrong all the way ... ;-)


Have to go back to work again ...

With kindest regards

Franky / Frank Herfert

Naw.  My skin is pretty thick :-)

It is totally programmable. The time between sparks can be as little as 50 micro seconds or all the
way up to infinity :-)

I would start with the squish flow bypass rotor  and throw out all we have learned about rotary ignition
timing so far and start over with the ignition. With or with out my high speed multi-spark ignition system.
Multiple off the shelf MSD ignition systems can be used to simulate my system. Of course
you will need a high speed micro processor to control them.

What happens to the flame front  near top dead center will be
completely  changed.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.