Hi!: perhaps I forgot sending this image form the 1974 patent of
the: 'Combustion promoting...', that is self-explained.
Thanks, have a good year 2017, best regards, + Gesund
Jose Gros-Aymerich
Madrid, Spain
That is like pissing into the wind. The squish flow is in the other
direction. What is needed is reducing the wind velocity.
Paul Lamar
How about stealing an idea from the burner cans inside jet engines where
the airflow is so fast that the fuel can't burn fast enough to keep the
fire from being blown out. They put an air dam in the way of the flow
that provides an eddy current behind the dam where the flame kernel can
live while the main airflow whistles by at supersonic speed.
Shaping the spark plug recess more like the sketch attached would
provide an island of relatively low velocity air for the flame kernel to
live in while the majority of the squish flow blows by. That should
provide a means for igniting that squish flow as it streams by.
I think it's a good idea that would require testing to see if it works
or if it's just misplaced imagination.
Mark LaPierre
Good idea. That is exactly what is happening in th rotary. That needs
to be the focus on the R&D. The squish flow wind is trying to blow the
fire away. This a phenomena you can experience. If you drop a wide wood
board on a dusty concrete floor notice how the dust is blown out from
under the board just before in impacts the floor.
One of the Mercedes combustion chamber shapes (a picture of which
is attached) is the right idea. Unfortunately it did not come with BSFC
data.
Spark holes need to be kept down in size as there are pressure losses when
the apex seal passes over them.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2016 All world wide rights reserved.