Dan found room between the fuel tank and the side of the aircraft to fit the
wastes gate control cable in. It gave us more precise control over the waste
gate opening with a much longer lever.
Worked like a charm. The max boost was limited to about 15 to 20 inches.
That is about 50 to 70 inches of HG.
So we said "lets see what happens if we make the 1.25 inch bypass
aperture smaller."
We then tried a .8 inch diameter and the turbo ran way. More eng RPM
more boost more eng RPM more boost
and so on. Mathematically it is an exponential function.
It started dragging my 4000 pound truck in park :-)
Dan jerked the throttle back.
We then tried a 1 inch aperture. It still ran away at RPM and high boost.
This is at sea level of course once you get up to several thousand feet
things will change.
Here are some pictures.
We need to go back into the Motec and reset the mixture.
Does anybody on here know how to convert Motec mixture numbers like .7
or .8
to a mixture ratio like 14 to one?
It starts as easy as my RX8. Smoke for a few seconds on start up but
that is normal for a turbo charger.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.