Dan found room between the fuel tank and the side of the aircraft
to fit the
wastes gate control cable in. It gave us more precise control over
the waste
gate opening with a much longer lever.
Worked like a charm. The max boost was limited to about 15 to 20
inches. That is about 50 to 70 inches of HG.
So we said "lets see what happens if we make the 1.25 inch bypass
aperture smaller."
We then tried a .8 inch diameter and the turbo ran way. More eng
RPM more boost more eng RPM more boost
and so on. Mathematically it is an exponential function.
It started dragging my 4000 pound truck in park :-)
Dan jerked the throttle back.
We then tried a 1 inch aperture. It still ran away at RPM and high
boost.
This is at sea level of course once you get up to several thousand
feet things will change.
Here are some pictures.
We need to go back into the Motec and reset the mixture.
Does anybody on here know how to convert Motec mixture numbers like
.7 or .8
to a mixture ratio like 14 to one?
It starts as easy as my RX8. Smoke for a few seconds on start up
but that is normal for a turbo charger.
Paul Lamar
Paul,
On the mixture, it sounds like it is measuring it in lambda which is
lambda=(Actual AFR) / (Stoichiometric AFR). Hopefully in the controller
it has an option to set the stoichiometric AFR.
Aaron Buster
Research Engineer
Advanced Powertrain and Emissions
Spark Ignited Engines R&D Department
Southwest Research Institute
I figured it out. You multiply the 0.700 times 14.7 and you get 10.29
to one. Very rich.
14.7 0f course is stoichiometric.
Here is a better video of the start.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.