Dan found room between the fuel tank and the side of the aircraft to
fit the wastes gate control cable in. It gave us more precise control
over the waste gate opening with a much longer lever.
Worked like a charm. The max boost was limited to about 15 to 20
inches. That is about 50 to 70 inches of HG.
So we said "lets see what happens if we make the 1.25 inch bypass
aperture smaller." We then tried a .8 inch diameter and the turbo ran
way. More eng RPM more boost more eng RPM more boost and so on.
Mathematically it is an exponential function. It started dragging my
4000 pound truck in park :-)
Dan jerked the throttle back.
We then tried a 1 inch aperture. It still ran away at RPM and high
boost.
This is at sea level of course once you get up to several thousand
feet things will change.
Here are some pictures.
We need to go back into the Motec and reset the mixture. Does anybody
on here know how to convert Motec mixture numbers like .7 or .8 to a
mixture ratio like 14 to one?
It starts as easy as my RX8. Smoke for a few seconds on start up but
that is normal for a turbo charger.
Paul Lamar
Is that 15 to 20 inches water, Hg or PSI? Should be Hg or PSI as Hg
would give the 70 inches water. I forget the conversion.
Dale Davies
I get confused some times. The Motec is a mishmash of measurement systems.
Imagine calling a pressure with a persons name. That is why
they call a pressure pascal's in the metric system. REALLY STUPID!!!!!!
It is a force divided by an area for @#@## sakes. PSI or Kilograms per
square meter is intuitive.
I am surprised they don't call Miles Per Hour or Kilometers Per Hour
Napoleon's :-)
The linear measurements are OK with mm, meters, kilometers doing away
with inches, feet and miles.
All arbitrary measurements. However one could say micro, milli, mega
and giga inches.
The latest is converting a ratio to a decimal number. Really stupid. Yes
14.7 is the ratio of air to
fuel that results in a complete change. Now we have .73 mixture.
We have boost in psi, inches of Hg (the aircraft engine standard)
pressure and heaven forbid microPascals.
30 inches of Hg is roughly atmospheric pressure at sea level. So is 15
psi. So you can see the conversion
problem. It extends to pressure measuring devices. Manometers are very
low cost and very accurate devices
with inches of water and inches of Mercury (Hg). There are absolute
pressure gages and gage pressure
gages. Inches of Hg is absolute while boost in psi is gage pressure.
The metric system has thrown the engineering world into chaos. It would
have been better to keep furlongs per fortnight
alone and forget the metric system :-) My late great rocket scientist
and experimental aircraft designer
friend, Vance Jaqua, was fond of saying we got to the moon on inches.
After all Sir Isaac Newton was English. It is not for nothing that they
call it Newtonian Physics.
I can understand why nobody wants to study engineering any more. It is
taught in the silly metric system.
One goes into the lumber yard and sees 2 by 4's and nuts and bolts in
inches.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want
off the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.