The Vision is a plans build plane from the USA state IL
 Pro-Composites Scott VanderVeen is the owner of the company.

 pro-composites.com <http://pro-composites.com

 Le Roux Breytenbach

 Hi Paul, we have had a couple of Visions built at Serpentine. One had
 a Subaru engine, reg VH WRX, and flew OK, though the airframe was a
 bit heavy. The other is still under construction and has 6 inches
 added to the cabin height as the builder is about 6’6” tall. Rs, Dave
 McCandless  in Perth

Dave: You don't have contact with the builders or possible contact details
of the flyable version of the Vision.?The builders group is not a very active
and only a small group sharing there experience.
Will contact you in private for the details.
Forgive me Paul for reaching out on this group ,as to get hold of our family of builders.
Much appreciated.

Le Roux Breytenbach

The Internet  and this  newsletter never seizes to amaze me. Le Roux and Dave
are just across the Indian ocean from each other. And I am on the exact opposite
side of the globe :-)

You guys can use the newsletter. I am sure there may be one or two more Visions
being built on here.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.