Subject: Building Projects
From: paul lamar
Date: 2/10/2017, 11:33 AM
To: A10-Me-Earthlink



The Vision is a plans build plane from the USA state IL
Pro-Composites Scott VanderVeen is the owner of the company.

pro-composites.com <http://pro-composites.com

Le Roux Breytenbach

Hi Paul, we have had a couple of Visions built at Serpentine. One
had a Subaru engine, reg VH WRX, and flew OK, though the airframe was
a bit heavy. The other is still under construction and has 6 inches
added to the cabin height as the builder is about 6’6” tall. Rs,
Dave McCandless  in Perth

Dave: You don't have contact with the builders or possible contact
details of the flyable version of the Vision.?The builders group is
not a very active and only a small group sharing there experience.
Will contact you in private for the details. Forgive me Paul for
reaching out on this group ,as to get hold of our family of
builders. Much appreciated.

Le Roux Breytenbach

The Internet  and this  newsletter never seizes to amaze me. Le Roux
and Dave are just across the Indian ocean from each other. And I am
on the exact opposite side of the globe :-)

You guys can use the newsletter. I am sure there may be one or two
more Visions being built on here.

Paul Lamar

    Hi Paul and Le Roux,
    Nice Depiction of the Oceans.
    Give me a day or two and maybe I can get some pics.
    The guy who built the flyer has passed away, but the airplane is still
    around.
    Rs,

    Dave McCandless  in Perth

I have Vision plans. But I've never had the time to actually build it.

David Mikesell
San Jose, California

Are the wings hot wired foam David?

----------------------------------------------------------------------

Back in 2011 Pierre Swanepoel from S. Afica (I think) was building a 13b
powered vision.
Here are some 3D's and pictures

Paul Lamar

Nope, sheet that is cut to shape, then glassed. I did the project they sold the VHS tape called the  "Totally Useless Box", it is the primer to get you used to the techniques in building the Vision.

David Mikesell

This is great. This looks like the cheapest way of getting into aviation.  With or without a pilots license
All you need to do is solo. While you are building this airplane will locally acquired materials.
I hope blue Styrofoam is available all over the world. Other than the gear box the 13B rotary
is near free.

Paul Lamar

The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.