Well I bought one – Plan to drive it for a while and then put the engine
in a homebuilt if all goes according to plan – I recall seeing a link to
a source where I could download free PDF files of Mazda shop manuals but
foolishly didn’t keep it – Can anyone point me in the right direction -
Roland Friestad
Make sure you run 2 cycle oil in the gas until you get a chance to check
out the small nylon
lines that feed oil to the oil injectors on the top of the engine. A car
that old is bound
to have very brittle oil injector lines. I use Walmart 2 cycle oil by
the gallon.
One ounce per gallon is fine. If you screw up to 4 ounces per gallon
still no problem.
The other thing that happens in old cars is the rubber elbows crack in the
intake system causing an air leak and the engine runs crappy.
They are down stream of the mass air flow sensor.
Paul Lamar
The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove you. ACRE NL web
site.
http://www.rotaryeng.net You Tube
http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.