2017.02.23

Hello Paul + Jose,

I've just tried translate.google.com with the summary / abstract of the text
of 2016. As far as I can see, it's ok.

Well, I already have started with the translation of the text of 2015 - can
throw it away now ... ;-)

Paul, please use google for translation of the parts you want to read.
It should work as long as your source text is not a facsimile (picture)
only.
Perhaps an OCR software can help in those cases ...

c/o Jose ...
thank you for the advice - manual translation with the use of dictionaries
is a pretty hard + time consuming job - no fun at all ... ;-)

Related to your question about glow plugs please see the enclosed old
patents by Toyota.

If you will run an engine with homogeneous mixture at higher power than
idle, you will see that ignition will occur much too early - combustion will
start as soon as the mixture gets in contact with the tip of the hot glow
plug - a bit like knocking because of an overheated spark plug ...

Of course, with direct injection there will be no problem - combustion start
is determined by the fuel injection timing.

It's late now here in "old germany" - time to finish ... ;-)

With kindest regards

Franky / Frank Herfert

Well put Frank. Thanks.

Paul Lamar


The Rotary Engine free News Letter. Powered by Linux. If you want off
the list PLEASE let me know and I will remove  you.  ACRE NL web
site. http://www.rotaryeng.net You Tube http://tinyurl.com/beqqxas
Copyright 1998-2017 All world wide rights reserved.